Cuttings re-injection (CRI) services are used in the oil and gas industry to dispose of drilling waste, such as drill cuttings, that is generated during the drilling process. CRI involves the injection of the waste material back into the ground, typically in the same formation or reservoir from which the oil or gas is being extracted. The purpose of CRI services is to minimize the environmental impact of drilling waste by safely and effectively disposing of it. CRI can also reduce the cost of waste management by eliminating the need to transport the waste to an off-site disposal facility. The cuttings re-injection services market was valued at $180.6 million in 2020 and is projected to reach $259.7 million by 2030, growing at a CAGR of 3.6% from 2021 to 2030.
Get a PDF brochure for Industrial Insights and Business Intelligence @ https://www.alliedmarketresearch.com/request-sample/13685
Cuttings re-injection is total containment or zero discharge drilling waste disposal process. It includes three significant components high-pressure injection pump, a cuttings transfer system, and a clarification unit. In addition, some of the other optional equipment used in the CRI process are a grinding mill, slurry holding tank, and sizing shaker. Cuttings re-injection (CRI) services comprise project regulatory support, technical-engineering support, data management services for CRI disposal operations, daily technical-engineering support, process monitoring, and reporting during active CRI operations, and project documentation.
Factors propelling the cutting re-injection services market growth are its advantages such as its potential to discard other wastes that would have to be taken to shore for disposal, allowing utilization of less expensive drilling fluid, no need for offshore transportation, cuttings can be injected if pre-treated, fewer chances of ground and surface water contamination, and removal of seafloor effect. However, some of the disadvantages hindering the market growth are an increase in air pollution because of large power needs, a rise in the requirement of large equipment and labor, and others.
The cuttings re-injection services market is segmented into type and application. Based on the type the market is categorized into dedicated injection and annular injection. On the basis of application, the market is bifurcated into on-shore and off-shore. Region-wise, the cutting re-injection services market is analyzed across North America, Europe, Asia-Pacific, and LAMEA. The cutting re-injection services market share is analyzed for all segments and countries.
On the basis of type, the annular injection segment garnered an 83.4% share in 2020. Based on the application, the onshore segment is expected to grow at a CAGR of 1.6% during the forecast period. The CRI process is common to both onshore and offshore operations. But the CRI process is easily manageable on an onshore site because of the availability of space.
Enquiry Before Buying: https://www.alliedmarketresearch.com/purchase-enquiry/13685
On the basis of region, the Asia-Pacific is expected to grow at a CAGR of 4.8% during the forecast period. China has a strong presence in the South China Sea. Chinese oil & gas companies have come across gas fields with reserves of around 300 billion tons along with oil fields reserves of around 200 million tons of oil.
Based on the region, Europe garnered a market share of 26.6% and is expected to grow at a CAGR of 2.8% during the forecast period. The UK government has announced to drill of oil & gas wells in the North Sea. The government has granted permission to drill well as a part of a cautious transformation away from fossil fuels and protect jobs and the economy.
Some of the key players operating in the cuttings re-injection services industry are Baker Hughes Company, NOV Inc., Advantek, Augean PLC, GN Solid Control, Haliburton, Schlumberger, PPLI, Weatherford, and Terralog Technologies.
Other players in the cuttings re-injection services market are Aker Solutions, Archer Limited, KCA Deutag, Odfjell Drilling, Drill Cuttings Disposal Company/ Apollo Resources, Step Oiltools, Derrick Corporation, Calder Limited, Scomi, and others.
Key findings of the study
- The report outlines the current cuttings re-injection services market trends and future scenarios of the cuttings re-injection services market from 2021 to 2030 to understand the prevailing opportunities and potential investment pockets.
- The cuttings re-injection services market size is provided in terms of revenue.
- On the basis of type, the dedicated injection; segment gained a 16.6% share in 2020 in terms of revenue.
- On the basis of application, the off-shore segment garnered a market share of 81.1% in 2020 in terms of revenue.
- On the basis of region, the North America region garnered a market share of 19.8% in 2020 in terms of revenue.
Procure Complete Report @ https://www.alliedmarketresearch.com/checkout-final/12741cce6c0db6b9ba6387c2e155a5f5?utm_source=AMR&utm_medium=research&utm_campaign=P21776
Impact of COVID-19 on the cuttings re-injection services market
- The spread of COVID-19 in numerous countries halted industrial activities.
- This resulted in an oversupply scenario in the oil and gas sector.
- This consequently resulted in decreased drilling activities.
- The decrease in drilling activities resulted in decreased demand for oilfield services such as waste management.
About Us
Allied Market Research (AMR) is a full-service market research and business-consulting wing of Allied Analytics LLP based in Portland, Oregon. Allied Market Research provides global enterprises as well as medium and small businesses with unmatched quality “Market Research Reports” and “Business Intelligence Solutions.” AMR has a targeted view to provide business insights and consulting to assist its clients to make strategic business decisions and achieve sustainable growth in their respective market domains.
Pawan Kumar, the CEO of Allied Market Research, is leading the organization toward providing high-quality data and insights. We are in professional corporate relations with various companies and this helps us in digging out market data that helps us generate accurate research data tables and confirms the utmost accuracy in our market forecasting. Each and every data presented in the reports published by us is extracted through primary interviews with top officials from leading companies of the domain concerned. Our secondary data procurement methodology includes deep online and offline research and discussion with knowledgeable professionals and analysts in the industry.
Contact:
David Correa
5933 NE Win Sivers Drive
#205, Portland, OR 97220
United States
USA/Canada (Toll-Free):
+1-800-792-5285, +1-503-894-6022
UK: +44-845-528-1300
Hong Kong: +852-301-84916
India (Pune): +91-20-66346060
Fax: +1(855)550-5975
help@alliedmarketresearch.com
Web: www.alliedmarketresearch.com
Allied Market Research Blog: https://blog.alliedmarketresearch.com
Follow Us on | Facebook | LinkedIn | YouTube |